ANGLE DIE GRINDERS
1281
1201-24-18
1/8″ Collet
Reducer Insert
1201-24-18C
1201
1281-GL
(Not recommended
for heavy use.)
Length excluding overhose.*
DGA-30-15 &
DGA-30-20
| MODEL | EXHAUST | RPM | COLLET (CHUCK) SIZE. (in.) | SPINDLE OFFSET (in.) | HP | HEAD HEIGHT (in.) | LENGTH (in.) | WEIGHT (lbs.) | AIR INLET NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|
| 1201 | FRONT | 20000 | 1/4 | 17/32 | .25 | 3 | 5 1/4 | 1.00 | 1/4 |
| 1281 | REAR | 24000 | 1/4 | 17/32 | .25 | 2 15/16 | 6 1/4 | 1.00 | 1/4 |
| 1281-GL | REAR | 25000 | 1/4 | 11/16 | .30 | 3 3/4 | 6 | 1.00 | 1/4 |
| DGA-30-15 | REAR | 15000 | 1/4 | 17/32 | .30 | 3 1/8 | 5 1/4 | 1.10 | 1/4 |
| DGA-30-20 | REAR | 20000 | 1/4 | 17/32 | .30 | 3 1/8 | 5 1/4 | 1.10 | 1/4 |
ANGLE GRINDERS
Type 27 Depressed Center Wheel.
(Wheels not included)
4″ & 5″
9110-4 &
9110-5
4″
“MADE in USA”
9113-AH &
9113-AH-2
7″
9160
5″ & 7″
AG-95-108
AG-120-75
| MODEL | RPM | WHEEL CAPACITY (in.) | WHEEL ARBOR HOLE (in.) | SPINDLE SIZE (in.) | HP | LENGTH (in.) | WEIGHT (lbs.) | AIR INLET NPT (in.) |
|---|---|---|---|---|---|---|---|---|
| 9110-4 | 12000 | 4 | 5/8 | 3/8-24 | .9 | 9 | 3.75 | 1/4 |
| 9110-5 | 12000 | 5 | 7/8 | 5/8-11 | .9 | 9 | 3.75 | 1/4 |
| 9113-AH | 13500 | 4 | 3/8 | 3/8-24 | 1.00 | 8 | 3.10 | 1/4 |
| 9113-AH-2 | 13500 | 4 | 3/8 | 3/8-24 | 1.00 | 10 | 3.50 | 1/4 |
| 9160 | 7500 | 7 | 7/8 | 5/8-11 | 1.25 | 13 1/8 | 8.40 | 3/8 |
| AG-95-108 | 10850 | 5 | 7/8 | 5/8-11 | .95 | 10 1/4 | 4.50 | 1/4 |
| AG-120-75 | 7500 | 7 | 7/8 | 5/8-11 | 1.20 | 12 3/4 | 7.75 | 3/8 |